Split System Installation Oakleigh

Split System Installation in Oakleigh

There’s nothing better than coming to your home on a hot 40-degree day, flipping on your split-system air conditioning and in a matter of seconds, the house and family members are cool.

Split system air-conditioning provides this versatility, which makes them tough to beat. Like all heaters and coolers to make sure they’re running to their maximum they must be maintained and serviced to a high standard by experienced professionals. Melbourne Heating Repairs & Service offers experienced technicians who know split system air conditioners from top to bottom. They specialise in all makes and models of these units providing you with assurance that they will finish the job in a professional manner.

We offer a wide range of services that include the following:

• Split System Installation Oakleigh
• Split System Repairs
• Split System Servicing

Our team comprised of HVAC and Cooling experts are licensed and fully trained to complete all types of tasks. If you’re looking for split system installation Oakleigh services then contact Local Heating and Cooling Professionals Oakleigh today and talk with one of our helpful team members.

How Do Split Systems Operate?

The split systems of air conditioning have the name because of one half of it (condenser) being located outside the house , while the second part (fan coil) is located inside. When it cools, warm air inside the room is absorbed from the fan coil and eliminated, resulting in cool air recirculating back into the home. While reverse cycle allows for your heat pump run in reverse to provide heat during cold days.

Split air conditioning systems can be installed to specific rooms, zones or rooms linked by copper pipe to an outdoor unit (condenser). Multiple-headed split-air conditioning units can be installed for at least nine rooms using only one outdoor unit and allowing for the control of temperature for each room.

What Are The Ongoing Costs With Split Systems?

One of the brands we recommend of Split Systems is Mitsubishi Electric. For the Mitsubishi Electric GE Series 2.5KW Split System, installed in an unassuming room that provides regular cooling and heating throughout the summer and winter months, the annual running cost would be $272.34.

Lowering split system Running Costs

It’s not hard to cut down on your operating costs by using the Split System. Based on the model you purchase, and it’s respective star rating will determine just how much you’ll save per year. Beyond the initial cost to how you use your Split System can help as well.

Guide to Operating A Split System

• Set the thermostat between 24C and 26C to cool. Every degree lower in summer increases the running cost by about 10%..
• Choose the economy option If your split system comes with one. Ensure that you regularly service your air conditioner.
• Keep the sun’s heat out by closing curtains and external blinds during the daytime. Close all doors and windows in areas being cooled when your split systems are in operation.
• When the split system has been shut off and the cooler outside, you can open doors and windows to let cool air flow in.
• Insulate your home to keep summer heat out and the cold in the winter months.
• Dress appropriately for the weather conditions.

Why Select A Split System?

Split air conditioners mounted on walls are the most widely used air conditioning systems for homes since they are inexpensive and simple to maintain.

Inverter Technology

Inverter technology is the key to more comfort throughout the year since it keeps the temperature constant, cuts costs (less energy consumption) and creates a lot less sound when it is employed. This is achieved through setting the speed of rotation more precisely.

Affordable

Wall mounted split AC models are most budget option for a small room, apartment or small house as they are relatively cheap to purchase (depending on the amount of indoor units you need) and don’t need requirement for ductwork.

Independent Temperature Control

Each indoor unit is able to control the temperature of the room it is placed in, which means that each room may have various temperature.

Air Quality

Many split air conditioning systems feature air filters and humidity control mechanisms that control the amount of dust and humidity in the space. This can provide those with sensitive conditions (children older, asthmatic, or allergic consumers) an ease of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to be connected to one outdoor condenser, which provides the comfort of having the best cooling system (in terms of output and physical restrictions) for a specific room.

Split System FAQ

Are split systems the same thing as the air conditioning?

Sure, Split System is an air conditioning system. But, the different kinds of air conditioning systems. It includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

All these systems operate using refrigerant and electricity, based on the same principle but they are different in term of installation.

What is the time frame to install a split system air conditioner?

Generally speaking an individual split-system air conditioner installation can last between 3 and 6 hours. However, the exact amount of time will depend upon a number of variables, including below:

• Location and size of both the outdoor and indoor unit
• The route of copper pipes between the outdoor unit and the indoor unit
• Electrical connections from main switchboard up to the AC unit

More Split System FAQ's

Should I replace or repair my air conditioner?

In the majority cases, if your A/C is more than 10 years of age and there are evident issues with the A/C There is a high likelihood that it is cheaper to replace then repair.

To help you make the right decision for your needs, speak with the team at ComfyHome to provide you with an honest assessment on the condition of your AC.

What size of split system air conditioner do I need?

A typical measurements ratio is multiple the size of the room by a ratio of 0.15 to get the needed power of the device in kilowatts.

For a space of 40 square metres, you’ll require a split air conditioning system of 6 kW. A unit with a cooling capacity of 2.5kW is ideal for rooms with 10-20 square meters. spaces.

The size of the Split system’s required air conditioning is also affected by other variables like how well the insulation is in place, the amount of people residing there and’ locations.

For a precise assessment of the needed Split Unit size please call us for a more detailed analysis.

More Split System FAQ's

How long will an air conditioner split system last?

In general air conditioners are designed to last between 10 and 20 years, on average. But this depends on a lot of factors such as the model of the AC, quality of the installation, regular service history, etc…

It is essential to service your Split System Air Conditioner regularly to extend its lifespan and improve efficiency.

How often should I wash my air conditioner’s air filter?

In accordance with Daikin Australia, it is strongly recommended to wash your air conditioner’s filters every two weeks to improve the efficiency of your system and possibly reduce your energy consumption by 5%-15%.

Oakleigh Gas Heating Services

• Braemar Ducted Gas Heating Servicing & Repair Oakleigh
• Vulcan Ducted Gas Heating Servicing & Repair Oakleigh
• Gas Hot Water System Installation & Repairs Oakleigh
• Evaporative Cooling Repair Oakleigh
• Gas Log Fire Service & Repairs Oakleigh
• Gas Heating Service Oakleigh
• Gas Heating Repairs Oakleigh
• Oakleigh
• Gas Heating Installation Oakleigh
• Brivis Ducted Gas Heating Servicing & Repair Oakleigh
• Gas Appliance Servicing & Repair Oakleigh
• Carbon Monoxide Testing Oakleigh
• Ducted Gas Heating Servicing & Repair Oakleigh
• Gas Space Heater Repair Oakleigh
• Gas Heating Oakleigh

What Types of Systems We Service & Repair

Every brand and type of heating system has its specific operation and maintenance needs Our experienced technicians are equipped with the expertise and know how to provide excellent services to all systems of heating including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience in repairs and maintenance of heating systems with a focus on all models and types of heating systems. We pride ourselves on a quick response time and commitment to excellence, efficiency , and reliability.

We are able to service and maintain the majority of top brands of heating systems and units which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Great Prices You Can Trust
• High-Quality Workmanship Guaranteed
• Great Reviews & Reputation
• We’re Personable & Friendly
• Experienced & Licenced Team
• Get a Quote With No obligation

Our Promise To You

At Melbourne Heating Repairs & Service we understand the discomfort of not having hot water. It’s a situation we do not believe anyone should suffer through. This is why we place top priority on emergencies with hot water. Our experienced plumbers are courteous and reliable and without doubt, we will be able to assist with any emergency.

We take pride in our customer service and it is our belief that the minor things matter most.

We take pride in our outstanding customer service. this is why our customers appreciate us:

• We always arrive when we tell you we will.
• Our staff will give you a call when they are thirty minutes away.
• Competitive pricing upfront and expert advice before we even begin the job.
• Always cleaning up after ourselves.

Our company Melbourne Heating Repairs & Service offer emergency and maintenance services for plumbing, heating, and electrical. If you are unsure about our services and what we offer.