Split System Installation Burwood East

Split System Install in Burwood East

There’s nothing better than arriving home to a 40-degree day, flipping on your split-system air conditioning and in just a couple of minutes the house and your family are cool.

Split system air-conditioning provides this versatility, which makes them tough to beat. But , just like all heaters or coolers that are required to run to their maximum, they need to be checked and maintained in a professional manner by qualified experts. Melbourne Heating Repairs & Service offers experienced technicians who know split system air-conditioners inside and out. They specialise in all makes and models of these units providing you with peace of mind that we will complete the task in a professional manner.

We provide a range of different Split System Installation services which include the following:

• Split System Installation Burwood East
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals is licensed and qualified to perform all kinds of tasks. If you’re searching for Split System Installation Burwood East services then contact Local Heating and Cooling Professionals Burwood East today and talk with one of our friendly team members.

How Do Split Systems Function?

Systems for split air conditioners have their name due to half the system (condenser) being outside the home, while the other half (fan coil) is installed inside. In cooling, hot air that is inside the room is taken in from the fan coil before being eliminated, resulting in cool air flowing back into the home. The reverse cycle permits that the heating system to operate in reverse, providing heating during cold days.

Split air conditioning systems are installed in individual rooms, areas or even multiple rooms connected by copper piping into an outdoor unit (condenser). Split air conditioners with multiple heads can be set up for up to nine rooms, with only one outdoor unit, permitting an individual temperature control for each room.

What Are The Ongoing Costs With Split Systems?

One of the brands we recommend to use for Split Systems is Mitsubishi Electric. For a Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular heating & cooling during the summer and winter months The annual operating cost would be measured at $272.34.

Reducing Split System Running Costs

It doesn’t take much to lower your running expenses by using the Split System. Depending on the model that you purchase, and it’s respective star rating, you will be able to determine how much you’ll save per year. But looking beyond the initial cost to how you use Your Split System can help as well.

Tips For Using Split Systems

• Set the thermostat between 24C and 26C for cooling. Each degree less in summer will increase your running costs by approximately 10%..
• Choose the economy option in the event that your split system is equipped with one. You should also regularly maintain your air cooling system.
• Make sure that the sun’s heat is kept out by closing curtains and blinds during the day. Close all doors and windows in areas that are cooled when the split system is in operation.
• When the split system has been shut off and the cooler outside, you can open doors along with windows, allowing the cool air flow in.
• Insulate your home to keep the warm summer days out and cool inside during winter.
• Dress to suit the weather.

Why Select Split Systems?

Wall mounted split air conditioning systems are the most commonly owned residential air conditioning system since they are inexpensive and easy to maintain.

Inverter Technology

Inverter technology is your key to more comfort throughout the year as it maintains the temperature constant, cuts costs (less consumption of energy) and creates a lot less noise when utilized. This is achieved through controlling the compressor rotation speed more precisely.

Affordable

Wall-mounted split AC units are your best affordable option for a one room apartment, small home or even a studio since they are inexpensive to purchase (depending on the amount of indoor units you’ll need) and there is no duct work required.

Independent Temperature Control

Each indoor unit has the ability to control the room that it is placed in, so each room could have distinct temperature.

Air Quality

A lot of split air conditioning systems come with air filtering and humidity control functions which control the amount dust and humidity that can be found in a room. This gives sensitive customers (children, elderly, asthmatic or allergic customers) an unwinding body and mind.

Multi-Head Split Systems

Multi-Head Split Systems enable multiple indoor units to be connected to one outdoor condenser that in turn provides you with satisfaction of having the ideal Air conditioner (in terms of output and physical limitations) for the room you are in.

Split System FAQ

Are split systems similar to one would expect from an air conditioner?

Absolutely, Split System has an air-conditioning system. However, there are many kinds of air conditioning systems. It include;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

All these systems operate by using refrigerant and electricity. They all operate on the same principles, however they are different in term of installation.

How long will it take to set up a split system air conditioner?

In general an individual split system air conditioning installation is expected to take 3-6 hours. But, the exact amount of time could vary based on various factors like below:

• The size and location of both indoor and outdoor unit
• The routing of copper pipes between indoor and outdoor unit
• Electrical connections from the main switchboards to A/C unit

More Split System FAQ's

Do I need to replace or fix my air conditioner?

In most situation when your air conditioner is at least 10-years-old and you notice evident issues with the A/C, there is a good possibility that it will be less expensive to replace it than to repair it.

In order to help you make the right decision To make the right choice, consult with the staff at ComfyHome to get an honest and accurate assessment of the state of your air conditioner.

What size split system air conditioning will I require?

A typical measure ratio would be to multiply the room area by a factor of 0.15 to obtain the required power of the measurement unit in kilowatts.

For a room area of 40sqm, you should need a Split system air conditioning unit of 6 kW. A cooling unit of 2.5kW is perfect for 10-20 sqm rooms spaces.

However, the amount of the Split system’s air conditioning requirements will also be affected by other variables like the room insulation, quantity of residents and’ location.

To make an accurate determination of the necessary Split Unit size we suggest that you get in touch with us to request a thorough analysis.

More Split System FAQ's

How long does an air conditioner split system last?

In general, an air conditioner is built to last from 10-20 years on average. But this depends on a lot of elements, such as the manufacturer of the air conditioner and the quality of the installation, the routine maintenance history and so on…

It is crucial to maintain the Split System air conditioner regularly for a longer life span and to increase effectiveness.

Do I need to wash the air conditioner’s air filter?

According to Daikin Australia, it is strongly recommended to clean your air conditioning filters every 2 weeks to increase the efficiency of your system and possibly reduce your energy consumption by 5%-15 15%.

Burwood East Gas Heating Services

• Gas Space Heater Repair Burwood East
• Gas Heating Repairs Burwood East
• Ducted Gas Heating Servicing & Repair Burwood East
• Gas Log Fire Service & Repairs Burwood East
• Gas Heating Installation Burwood East
• Brivis Ducted Gas Heating Servicing & Repair Burwood East
• Carbon Monoxide Testing Burwood East
• Vulcan Ducted Gas Heating Servicing & Repair Burwood East
• Evaporative Cooling Repair Burwood East
• Gas Hot Water System Installation & Repairs Burwood East
• Gas Heating Service Burwood East
• Gas Appliance Servicing & Repair Burwood East
• Gas Heating Burwood East
• Braemar Ducted Gas Heating Servicing & Repair Burwood East
• Burwood East

What Types of Systems We Service & Repair

Each type and brand of heating requires its individual operation and maintenance requirements Our skilled technicians are equipped with the expertise and know how to provide top-quality services on all types of heating equipment, which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience in repairs and maintenance of heating systems and specialize in all types and brands of heating equipment. We take pride in a rapid response time as well as a commitment to efficiency, excellence and reliability.

We are able to service and maintain all major brands of heating units and systems, including:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Low Prices You Can Trust
• High-Quality Workmanship Guaranteed
• Excellent Reviews & Reputation
• We’re personable and friendly
• Highly Experienced and Licenced Team
• Get a Quote With No Costs

Our Promise To You

At Melbourne Heating Repairs & Service we understand the discomfort of not having hot water. This is something that we would never want anyone to have to experience. That’s why we give an emphasis on emergencies involving hot water. Our experienced plumbers are reliable and friendly Without a doubt, we are able to assist you in any circumstance.

We pride ourselves on our customer service and it is our conviction that the tiny things are the most important.

We pride ourselves on our excellent customer service. Here’s why our clients appreciate us:

• We will always be there when we say we will.
• Our staff will give you their number when they’re 30 minutes away.
• Upfront competitive pricing and advice before we begin the work.
• Always getting our hands clean after us.

At Melbourne Heating Repairs & Service offer emergency and maintenance services in plumbing, electrical, and heating. If you have questions about our services or what we can offer, please contact us.