Split System Installation Port Melbourne

Split System Install in Port Melbourne

There’s nothing more satisfying than coming home to a day of 40 degrees and switching on your split system air conditioning and in a matter of minutes the house and your family are cool.

Split system air conditioning offers this versatility, which makes them tough to beat. But , just like all heaters or coolers that are required to run at their peak they must be serviced and maintained in a professional manner by skilled professionals. Melbourne Heating Repairs & Service offers experienced technicians who know split system air conditioners from top to bottom. They specialise in all makes and models of these units giving you the assurance that we will finish the job to a professional standard.

We provide a range of different Split System Installation services which include the following:

• Split System Installation Port Melbourne
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals is licensed and qualified to complete all types of work. If you’re searching for Split System Installation Port Melbourne services then contact Local Heating and Cooling Professionals Port Melbourne today and talk to one of our knowledgeable team members.

How Do Split Systems Function?

Split air conditioning systems get their name because of half it (condenser) being located outside the house while the other half (fan coil) is located inside. When cooling, the warm air inside the room is drawn in through the fan coil before being taken out, resulting into cooling air returning to the home. In reverse mode, it allows your heat pump operate in reverse to provide heat during cold days.

Split air conditioning systems can be fitted to individual rooms, areas or even multiple rooms connected by copper piping into an outdoor unit (condenser). Systems with multi-head splits can be used in up to nine rooms using only one outdoor unit and allow for the control of temperature for each room.

What Are The Running Costs With Split Systems?

One of the top brands to use for Split Systems is Mitsubishi Electric. For the Mitsubishi Electric GE Series 2.5KW Split System, installed in the smallest of rooms, providing regular cooling and heating during the summer and winter seasons The annual operating cost would be $272.34.

The reduction of split system Running Costs

It’s not hard to lower your running expenses with the Split System. The model you purchaseand its star rating, you will be able to determine how you’ll save each year. But looking beyond the initial cost to the way you use it Split System can help as well.

Tips For Using Split Systems

• Set the thermostat to 24C and 26C to cool. Every degree lower in summer will raise the cost of running by around 10%.
• Choose the economy option in the event that your split system is equipped with one. Ensure that you regularly service your air conditioning.
• Keep the sun’s heat away by closing curtains as well as external blinds during the day. Close all doors and windows in areas being cooled when it is split running.
• When the split system is turned off and the cooler is outside, it is recommended to open the doors along with windows, allowing cool air inside.
• Insulate your home to keep the cool summer air out and keep the heat inside in winter.
• Wear clothes that are appropriate for the weather conditions.

Why Select Split Systems?

Wall mounted split air conditioning systems are among the most commonly used air conditioning systems for homes because they are cost-effective and simple to maintain.

Inverter Technology

Inverter technology is your best option for greater comfort throughout the year because it maintains the temperature at a constant level, reduces costs (less energy use) and generates less sound when it is employed. This is accomplished by controlling the compressor rotation speed more precisely.

Affordable

Wall mounted Split AC units are your most economical option for a single room or apartment as they are comparatively inexpensive to purchase (depending on how many indoor units you will require) and they don’t require duct work required.

Independent Temperature Control

Each indoor unit has the ability to regulate the space it is installed in, thus each room may have various temperature.

Air Quality

A lot of Split air conditioners have air filters and humidity control mechanisms which regulate the amount of dust and humidity inside the room. This can provide those with sensitive conditions (children older, asthmatic, or allergic people) the peace of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems allow multiple indoor units to connect to a single outdoor condenser which gives you the comfort of having the best cooling system (in terms of physical and output constraints) for a particular room.

Split System FAQ

Is a split system similar to an air conditioner?

Absolutely, Split System includes an air-conditioning unit. There are various kinds of air conditioning systems. This that include

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

Each system operates on electricity & refrigerant under the same principal but very different in terms of installation.

What is the time frame to install a split system air conditioner?

In general an individual split system air conditioning installation can be completed in 3-6 hours. The exact length of time will depend on many factors such as the following:

• Size and location of both indoor and outdoor unit
• The routing of copper pipes between outdoor and indoor units
• Electrical connections from main switchboard up to the AC unit

More Split System FAQ's

Do I need to replace or fix my AC unit?

In most situation, if your A/C is more than 10 years and there are obvious issues with your AC, there is a good possibility that it will be cheaper to replace then repair.

To help you make the right decision It is recommended to speak with the team at ComfyHome for an honest opinion on the condition of your air conditioner.

What size of split system air conditioner do I need?

A typical measurement ratio is to multiple the room area by a factor of 0.15 to obtain the required power of the unit in Kilowatts.

For a room area that is 40 sqm, you’ll need a Split air conditioning system of 6 kW. A unit that can cool the air at 2.5kW is suitable for 10 -20 sqm room spaces.

However, the amount of the Split system’s air conditioning is also dependent on other factors such as the room insulation, quantity of residents and’ locations.

For an accurate assessment of the Split unit size, we suggest that you call us for a more detailed analysis.

More Split System FAQ's

What is the longest a split system air conditioner last?

In general, an air conditioner is constructed to last for 10-20 years in the an average. However, it is contingent on a variety of things like the manufacturer of the air conditioner it is installed on, the quality of its installation, regular service history, and more…

It is essential to service the Split System air conditioner regularly to extend its life and increase efficiency.

Do I need to clean the air conditioner’s air filter?

In accordance with Daikin Australia, it is highly recommended that you take care to clean your air conditioning filter every 2 weeks to increase the efficiency of the system, and ultimately reduce your energy usage by 5%-15 percentage.

Port Melbourne Gas Heating Services

• Ducted Gas Heating Servicing & Repair Port Melbourne
• Gas Heating Port Melbourne
• Gas Hot Water System Installation & Repairs Port Melbourne
• Braemar Ducted Gas Heating Servicing & Repair Port Melbourne
• Vulcan Ducted Gas Heating Servicing & Repair Port Melbourne
• Gas Appliance Servicing & Repair Port Melbourne
• Gas Heating Service Port Melbourne
• Gas Heating Installation Port Melbourne
• Carbon Monoxide Testing Port Melbourne
• Evaporative Cooling Repair Port Melbourne
• Gas Space Heater Repair Port Melbourne
• Gas Log Fire Service & Repairs Port Melbourne
• Gas Heating Repairs Port Melbourne
• Port Melbourne
• Brivis Ducted Gas Heating Servicing & Repair Port Melbourne

What Types of Systems We Service & Repair

Each brand and style of heating has it’s own maintenance and operation Our skilled technicians are knowledgeable and experience to offer top-quality services across all kinds of heaters including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience with heating repair and maintenance, specialising in all styles and brands of heating systems. We pride ourselves on having a fast response time and dedication to quality, efficiency and reliability.

We can service and maintain all major brands of heating units and systems such as:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Great Prices You Can Trust
• Quality Workmanship Guaranteed
• Excellent Reputation & Reviews
• We’re Personable & Friendly
• A Team of Experienced and Licenced Professionals
• Get a Quote Without obligation

Our Promise To You

We at Melbourne Heating Repairs & Service we understand the frustration of not having hot water. It’s a situation we believe no one should be forced to endure. This is the reason we place top priority on emergencies with hot water. Our experienced plumbers are reliable and friendly, without a doubt we are able to assist you in all situations.

We are proud of our customer service and it is our belief that even the little things matter the most.

We pride ourselves on our great customer service, here’s why our customers love us:

• We always show up when we say we will.
• Our experts will give you the number to call them when they are thirty minutes away.
• Competitive pricing upfront and expert advice prior to the start of the project.
• Always making sure we clean up after us.

At Melbourne Heating Repairs & Service offer emergency and maintenance services in plumbing, electrical, and heating. If you are unsure about our services, and the services we can offer, please contact us.