Split System Installation Fitzroy

Split System Installation in Fitzroy

There’s nothing more satisfying than coming home on a hot day and turning on your split system air conditioning and in a matter of minutes your house and your family is cool.

Split system air-conditioning offers such flexibility, which makes them difficult to beat. Like all heaters and coolers that are required to run at their best, they need to be maintained and serviced to the highest standard by qualified experts. Melbourne Heating Repairs & Service offers experienced technicians who know split system air conditioners both inside and outside. They specialise in all makes and models of these units offering you assurance that they can get the job done at a professional level.

We offer a wide range of services that comprise the following:

• Split System Installation Fitzroy
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals are licensed and certified to perform all kinds of work. If you’re looking for split system installation Fitzroy services then contact Local Heating and Cooling Professionals Fitzroy today and talk to one of our knowledgeable team members.

How Do Split Systems Operate?

The split systems of air conditioning are their name due to half it (condenser) is located outside of the house while the other part (fan coil) is located inside. While cooling, warm air in the room is absorbed from the fan coil, and then taken out, resulting into cooling air returning to the home. Reverse cycle allows that the heating system to run in reverse to provide heat in cold weather.

Systems for split air conditioners are fitted to individual rooms, zones or rooms that are connected via copper pipes to an outdoor unit (condenser). Systems with multi-head splits can be installed in at least nine rooms, with only one outdoor unit permitting separate temperature control for each room.

What Are The Ongoing Costs For Split Systems?

One of our recommended brands of Split Systems is Mitsubishi Electric. For a Mitsubishi Electric GE Series 2.5KW Split System, installed in a small room providing regular cooling and heating throughout the summer and winter time, the annual running cost would be $272.34.

Reduced split system Running Costs

It’s not hard to cut down on your operating costs with a Split System. Depending on the model you buy, as well as its star rating will determine how you’ll save each year. Beyond the initial cost to how you will use your Split System can help as well.

Guide to Operating A Split System

• Set the thermostat to 24C and 26C to allow for cooling. Every degree lower during summer increases the running cost by around 10%.
• Choose the economy option if your split system has one. Also, you should regularly check the condition of your air conditioner.
• Keep the sun’s heat out by closing curtains and external blinds during the daytime. Close the doors and windows of areas that are cooling when your split systems are on.
• If the split system is turned off and the cooler is outside, open the doors or windows and let cool air circulate.
• Insulate your property to help keep warm summer days out and cool inside in winter.
• Dress to suit the weather.

Why Choose A Split System?

Air conditioning units mounted in wall are the most commonly used residential air conditioning system, as they are affordable and simple to maintain.

Inverter Technology

Inverter technology is your mainstay for comfort all through the year as it maintains an even temperature, helps save costs (less consumption of energy) and produces a lesser amount of noise when employed. This is achieved by setting the speed of rotation more precisely.

Affordable

Wall-mounted Split AC systems are the best economical option for a single room, apartment or small house because they are relatively inexpensive to buy (depending on the number of indoor units you’ll need) and don’t need installation of ducts.

Independent Temperature Control

Each indoor unit is able to control the room that it is located within, and each space can have a various temperature.

Air Quality

A lot of split air conditioning systems come with air filtering and humidity control features that regulate the amount of dust and humidity that can be found in the room. This allows for sensitive customers (children, elderly, asthmatic or allergic consumers) an unwinding body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to be connected to one outdoor condenser which provides the peace of mind that you have the ideal cooling system (in terms of physical and output constraints) for a particular room.

Split System FAQ

Are split systems similar to the air conditioning?

Yes, Split System has an air-conditioning system. There are various types of air conditioning system include;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

Each system operates using refrigerant and electricity, based on the same principle, but are different in terms.

What is the time frame to install a split system air conditioner?

Generally speaking an individual split-system air conditioner installation is expected to take 3-6 hours. However, the exact amount of time will depend on a variety of factors, such as the following:

• Location and size of both the outdoor and indoor unit
• The route of copper pipes between indoor and outdoor unit
• Electrical connections from the main switchboard up to the AC unit.

More Split System FAQ's

Should I replace or repair my cooling system?

In the majority of cases when your air conditioner is over > 10 years old and has obvious issues with your AC, there is a good chance that it’s cheaper to replace then repair.

For help in making the best decision It is recommended to talk to the experts at ComfyHome to give you an honest opinion on the condition of your AC.

What size of split system air conditioning will I require?

A common measurements ratio is multiple the size of the room by a factor of 0.15 to calculate the necessary power of the measurement unit in kilowatts.

For a room area that is 40 sqm, you’ll have a Split system air conditioning unit that is 6 kW. A cooling unit of 2.5kW is suitable for 10-20 sqm rooms areas.

However, the amount of the Split system’s required air conditioning will also be affected by other variables like the room insulation, size of the room, and’ location.

For a precise assessment of the Split units size please contact us for a comprehensive analysis.

More Split System FAQ's

What is the longest an air conditioner split system last?

In general air conditioners are designed to last between 10 and 20 years on average. But it depends on heaps of elements, such as the brand of the A/C as well as the quality of the installation, routine service history etc…

It is essential to service your split system air conditioner on a regular basis to prolong lifetime and enhance effectiveness.

How often should I wash my air conditioner’s air filter?

As per Daikin Australia, it is highly recommended that you cleanse your air conditioning filters every 2 weeks to increase the efficiency of the system, and ultimately reduce your energy consumption by 5%-15 percent.

Fitzroy Gas Heating Services

• Carbon Monoxide Testing Fitzroy
• Gas Heating Service Fitzroy
• Gas Heating Fitzroy
• Gas Appliance Servicing & Repair Fitzroy
• Gas Hot Water System Installation & Repairs Fitzroy
• Gas Log Fire Service & Repairs Fitzroy
• Fitzroy
• Evaporative Cooling Repair Fitzroy
• Brivis Ducted Gas Heating Servicing & Repair Fitzroy
• Gas Heating Installation Fitzroy
• Vulcan Ducted Gas Heating Servicing & Repair Fitzroy
• Braemar Ducted Gas Heating Servicing & Repair Fitzroy
• Ducted Gas Heating Servicing & Repair Fitzroy
• Gas Heating Repairs Fitzroy
• Gas Space Heater Repair Fitzroy

What Types of Systems We Service & Repair

Each brand and style of heating system has its own operation and maintenance Our skilled technicians have the knowledge and know how to provide the best service for all heating systems, which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience in the field of heating repairs and maintenance, specialising in all styles and brands of heating equipment. We are proud of our fast response time and dedication to excellence, efficiency , and reliability.

We are able to service and maintain the majority of important brands of heating units and systems which include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Competitive Prices You Can Trust
• Quality Workmanship Guaranteed
• Great Reviews & Reputation
• We’re friendly and personable.
• A Team of Experienced and Licenced Professionals
• Request a Quote with No Costs

Our Promise To You

We at Melbourne Heating Repairs & Service we understand the inconvenience of not having any hot water and it’s something we do not believe anyone should suffer through. That’s why we give such a high priority on emergencies with hot water. All of our experienced plumbers are reliable and friendly, without a doubt we can assist you in any situation.

We are proud of our customer service , and it is our belief that even the little things matter the most.

We pride ourselves on our outstanding customer service. Here’s why our clients love us:

• We always show up when we tell you we will.
• Our technicians will give you the number to call them when they are 30 minutes away.
• Price upfront, competitive and professional advice prior to the start of the project.
• Always taking care to clean up after our own mess.

We at Melbourne Heating Repairs & Service offer emergency and maintenance services for electrical, plumbing and heating. If you have any questions regarding our services or what we offer.