Split System Installation Belgrave South

Split System Installation in Belgrave South

There’s nothing better than arriving home to a 40 degree day switching on your split system air-conditioning and within a matter of minutes the house and family members are cool.

Split system air conditioning offers this flexibility, which makes them difficult to beat. Like all heaters and coolers that are required to run optimally they must be checked and maintained in a professional manner by qualified professionals. Melbourne Heating Repairs & Service offers experienced technicians who know your split system air conditioners both inside and outside. They specialize in all brands and models of these units providing you with peace of mind that we can get the job done to professional standards.

We offer a wide range of different Split System Installation services which include the following:

• Split System Installation Belgrave South
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals are licensed and fully trained to handle all kinds of jobs. If you’re looking for Split System Installation Belgrave South services then contact Local Heating and Cooling Professionals Belgrave South today and talk with one of our friendly team members.

How Do Split Systems Work?

Systems for split air conditioners are their name because half of that system (condenser) located outside the house , while the other portion (fan coil) is installed inside. In cooling, warm air in the room is absorbed from the fan coil, and then is then removed, which results in cool air recirculating back into the house. While reverse cycle allows for your heat pump operate in reverse, providing heating in cold weather.

Systems for split air conditioners can be placed in rooms, areas , or rooms joined by copper piping with an outside unit (condenser). Systems with multi-head splits can be used for as many as nine rooms with only one outdoor unit permitting individual temperature control of each room.

What Are The Ongoing Costs For Split Systems?

One of our recommended brands for Split Systems is Mitsubishi Electric. If you are looking for the Mitsubishi Electric GE Series 2.5KW Split System, installed in an unassuming room that provides regular cooling and heating throughout the summer and winter seasons, the annual running cost is $272.34.

The reduction of split system Running Costs

It’s not difficult to cut down on your operating costs by using a Split System. Based on the model you buy, as well as its star rating will determine just how much you will save each year. It is important to look beyond the initial price to how you utilize the Split System can help as well.

Guide to Operating A Split System

• Set the thermostat to 24C and 26C to cool. Every degree lower in summer will increase the running costs by approximately 10%..
• Make use of the economy setting when your split has one. Ensure that you regularly service your air conditioning.
• Make sure that the sun’s heat is kept out by closing curtains and external blinds in the morning. Close doors and windows to areas that are cooled when it is split running.
• When the split system is switched off , and the cooler outside, open the doors as well as windows in order to let cool air in.
• Insulate your home to keep cool summer air out and keep the heat inside during winter.
• Dress according to the weather.

Why Select A Split System?

Split air conditioners mounted on walls are among the most commonly used residential air conditioning system because they’re affordable and easy to maintain.

Inverter Technology

Inverter technology is your best option for greater comfort throughout all seasons since it ensures the temperature at a constant level, reduces costs (less consumption of energy) and produces relatively less sound when it is utilized. This is achieved by managing the speed of the compressor more precisely.

Affordable

Wall mounted divided AC system are most cost-effective option for a single room, apartment or small house as they are relatively cheap to purchase (depending on the amount of indoor units you require) and do not require duct work required.

Independent Temperature Control

Each indoor unit is able to control the area it is located in, thus each room could have various temperature.

Air Quality

A lot of HVAC systems that are split feature air filtering and humidity control features that regulate the amount of dust and humidity within the space. This gives sensitive customers (children or elderly, asthmatic or allergic consumers) an ease of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to be connected to one outdoor condenser, which in turn gives you the peace of mind that you have the ideal cooling system (in terms of output and physical constraints) for a specific room.

Split System FAQ

Is a split system similar to an air conditioner?

Yes, Split System can be described as an air conditioner system. There are various types of air conditioning system that include

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

All these systems operate on electricity & refrigerant under the same principles, however they are different in terms of how they are installed.

What is the time frame to install a split system air conditioner?

In general, a single AC split installation can take between 3-6 hours. But, the exact amount of time can vary based on various factors like below;

• Size and location of both indoor and outdoor unit
• The routing of copper pipes between outdoor and indoor units
• Electrical connections from the main switchboard up to the AC unit.

More Split System FAQ's

Should I replace or repair my AC unit?

In the majority of cases the A/C is more than 10 years old and there are apparent issues with your air conditioner there’s a good likelihood that it is cheaper to replace rather than fix.

To help you make the best decision for your needs, contact the experts at ComfyHome to provide you with an honest and accurate assessment of the condition of your air conditioner.

What size of split system air conditioner do I need?

A typical measurements ratio is multiple the room area by a factor of 0.15 in order to determine the power of the unit in kilowatt.

For a room with a size of 40sqm, you should have a Split system air conditioning unit of 6 kW. A cooling unit of 2.5kW is ideal for 10-20 sqm rooms areas.

However, the size of the Split system’s air conditioning requirements can also be affected by other variables like how well the insulation is in place, the quantity of residents and’ position.

To make an accurate determination of the required Split unit size, please contact us for a comprehensive analysis.

More Split System FAQ's

How long can a split system air conditioner last?

In general, an air conditioner is built to last 10-20 years in the an average. But this depends on a lot of factors such as the brand of the A/C it is installed on, the quality of its installation, routine maintenance history etc…

It is vital to check the maintenance of the Split System air conditioner often for a longer life span and to increase efficiency.

What is the best frequency to clean my air conditioner’s air filter?

In accordance with Daikin Australia, it is strongly recommended to cleanse your air conditioning filters every 2 weeks to increase the efficiency of the system and reduce your energy consumption by 5%-15 percentage.

Belgrave South Gas Heating Services

• Gas Heating Installation Belgrave South
• Gas Hot Water System Installation & Repairs Belgrave South
• Gas Heating Repairs Belgrave South
• Ducted Gas Heating Servicing & Repair Belgrave South
• Belgrave South
• Brivis Ducted Gas Heating Servicing & Repair Belgrave South
• Evaporative Cooling Repair Belgrave South
• Gas Appliance Servicing & Repair Belgrave South
• Gas Heating Belgrave South
• Vulcan Ducted Gas Heating Servicing & Repair Belgrave South
• Carbon Monoxide Testing Belgrave South
• Gas Heating Service Belgrave South
• Gas Log Fire Service & Repairs Belgrave South
• Gas Space Heater Repair Belgrave South
• Braemar Ducted Gas Heating Servicing & Repair Belgrave South

What Types of Systems We Service & Repair

Every brand and type of heating comes with its individual operation and maintenance requirements Our highly skilled technicians are equipped with the expertise and know how to provide excellent services to all systems of heating, including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience in repairs and maintenance of heating systems that specialize in all kinds and models of heating systems. We are proud of our rapid response time as well as a commitment to efficiency, excellence and reliability.

We service and maintain the majority of important brands of heating systems and units, including:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Competitive Prices You Can Trust
• Quality Workmanship Guaranteed
• Great Reputation & Reviews
• We’re friendly and personable.
• A Team of Experienced and Licenced Professionals
• Get a Quote Without obligation

Our Promise To You

We at Melbourne Heating Repairs & Service we understand the difficulty of not having hot water. This is something we do not believe anyone should have to experience. This is why we put top priority on emergencies with hot water. All of our experienced plumbers are courteous and reliable We will be able to assist you in all situations.

We pride ourselves on our customer service , and it is our conviction that the tiny things are the most important.

We take pride in our great customer service, this is why our customers love us:

• We always show up when we declare that we will.
• Our staff will give you the number to call them when they are thirty minutes away.
• Competitive pricing upfront and expert advice prior to the start of the project.
• Always getting our hands clean after ourselves.

At Melbourne Heating Repairs & Service offer emergency and maintenance services for electrical, plumbing and heating. If at any time you have any questions regarding our services, and the services we provide, we are here to help.