Split System Installation Beaconsfield

Split System Installation in Beaconsfield

There’s nothing more enjoyable than coming home on a hot 40-degree day, activating your split system air conditioning and in a matter of minutes , your home and your family is cool.

Split system air-conditioning offers such flexibility, which makes them difficult to beat. However, like all heaters and coolers to keep them running to their maximum they must be maintained and serviced to a high standard by qualified experts. Melbourne Heating Repairs & Service offers experienced technicians that know your split system air-conditioners from top to bottom. They specialise in all makes and models of these units giving you the assurance that we will finish the job at a professional level.

We provide a range of services that comprise the following:

• Split System Installation Beaconsfield
• Split System Repairs
• Split System Servicing

Our team of professionals in the field of heating and cooling are licensed and fully trained to perform all kinds of work. If you’re searching for split system installation Beaconsfield services then contact Local Heating and Cooling Professionals Beaconsfield today and talk with one of our friendly team members.

How Do Split Systems Function?

The split systems of air conditioning earn their name because half of the system (condenser) being outside the home, while the other part (fan coil) is located inside. When it cools, warm air inside the room is absorbed by the fan coil, and then taken out, resulting into cool air being recirculated back into the house. While reverse cycle allows for your heat pump run in reverse to provide heating in cold weather.

The split system of air conditioning can be installed to specific rooms, areas , or rooms joined by copper piping into an outdoor unit (condenser). Split air conditioners with multiple heads can be installed for as many as nine rooms, with only one outdoor unit, permitting an individual temperature control for each room.

What Are The Ongoing Costs With Split Systems?

One of the top brands to use for Split Systems is Mitsubishi Electric. For a Mitsubishi Electric GE Series 2.5KW Split System, installed in an area that is small, and provides regular cooling and heating throughout the winter and summer periods and the annual running costs will be $272.34.

Reduced Split System Running Costs

It’s easy to lower your running expenses with a Split System. Based on the model you purchaseand its star rating will determine just how much you’ll save per year. Beyond the initial cost to how you utilize it Split System can help as well.

Guide to Operating A Split System

• Set the thermostat to 24C and 26, which is the ideal temperature for cooling. Every degree lower during summer will raise the cost of running by 10%..
• Use the economy setting in the event that your split system is equipped with one and regularly service your air cooling system.
• Make sure that the sun’s heat is kept out by closing curtains and external blinds during the day. Close windows and doors to areas that are being cooled while you have the split unit on.
• If the split system is switched off and its cooler outside, open doors and windows to let cool air flow in.
• Insulate your house to block warm summer days out and cool inside during winter.
• Dress to suit the weather conditions.

Why Choose A Split System?

Air conditioning units mounted in wall are among the most commonly used residential air conditioning system since they are inexpensive and easily to maintain.

Inverter Technology

Inverter technology is your most effective way to enjoy more comfort throughout the year since it keeps the temperature at a constant level, reduces costs (less consumption of energy) and produces relatively less sound when it is it is used. This is accomplished by managing the speed of the compressor more precisely.

Affordable

Wall-mounted split AC models are most budget option for a small room apartment, small home or even a studio because they are relatively inexpensive to buy (depending on the amount of indoor units you will require) and there is no duct work required.

Independent Temperature Control

Each indoor unit has the ability to control the temperature of the room it is placed in, which means that each room can have a different temperatures.

Air Quality

A lot of HVAC systems that are split feature air filters and humidity control mechanisms which control the amount dust and humidity inside the room. This allows for sensitive customers (children, elderly, asthmatic or allergic users) peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to be connected to one outdoor condenser which in turn gives you satisfaction of having the best Air conditioner (in terms of output and physical constraints) for the room you are in.

Split System FAQ

Is a split system the same thing as one would expect from an air conditioner?

It is true that Split System includes an air-conditioning unit. There are various types of air conditioning system include;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

All of them operate using refrigerant and electricity, based on the same principle but they are different in term of installation.

What is the time frame to install a split-system air conditioner?

In general the typical split system air conditioning installation is expected to take between 3-6 hours. However, the exact amount of time could vary based on many factors such as below:

• The size and location of both outdoor and indoor unit
• Copper pipes that are routed between outdoor and indoor units
• Electrical connections from the main switchboard to the A/C unit

More Split System FAQ's

Do I need to replace or fix my cooling system?

In most situation in the event that your air conditioner is more than 10-years-old and there are obvious issues with your AC there’s a good chance that it’s more affordable to replace than repair.

To help you make the right decision To make the right choice, contact the experts at ComfyHome to give you an honest evaluation of the condition of your air conditioner.

What size of split system air conditioner will I require?

The standard measurement ratio is to multiple the area of the room by a ratio of 0.15 to get the needed power of the unit in Kilowatts.

For a room with a size of 40sqm, you should need a Split system air conditioning unit that is 6 kW. A cooling unit of 2.5kW is ideal for rooms with 10-20 square meters. areas.

However, the amount of the Split system’s air conditioning requirements can also be dependent on other factors such as the insulation of the room, the quantity of residents and’ place of residence.

For a precise assessment of the necessary Split dimension, we recommend you get in touch with us to request a thorough analysis.

More Split System FAQ's

What is the longest an air conditioner split system last?

In general, an air conditioner is built to last from 10-20 years, on an average. However, it is contingent on a variety of factors such as the model of the AC it is installed on, the quality of its installation, routine service history and so on…

It is essential to service your split system air conditioner often to prolong lifetime and enhance efficiency.

How often should I clean the air conditioner’s air filter?

Based on Daikin Australia, it is strongly recommended to wash your air conditioner’s filters every two weeks to improve the system’s efficiency and potentially decrease your energy use by 5%-15 percent.

Beaconsfield Gas Heating Services

• Gas Appliance Servicing & Repair Beaconsfield
• Evaporative Cooling Repair Beaconsfield
• Vulcan Ducted Gas Heating Servicing & Repair Beaconsfield
• Gas Hot Water System Installation & Repairs Beaconsfield
• Gas Space Heater Repair Beaconsfield
• Gas Heating Repairs Beaconsfield
• Gas Heating Beaconsfield
• Gas Heating Service Beaconsfield
• Brivis Ducted Gas Heating Servicing & Repair Beaconsfield
• Ducted Gas Heating Servicing & Repair Beaconsfield
• Gas Heating Installation Beaconsfield
• Beaconsfield
• Carbon Monoxide Testing Beaconsfield
• Gas Log Fire Service & Repairs Beaconsfield
• Braemar Ducted Gas Heating Servicing & Repair Beaconsfield

What Types of Systems We Service & Repair

Each brand and style of heating comes with its individual operation and maintenance requirements; our experienced technicians have the insight and know how to provide first rate services across all kinds of heaters including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team is well-versed and has years of experience in repairs and maintenance of heating systems, specialising in all styles and models of heating systems. We pride ourselves on having a quick response time and commitment to excellence, efficiency and reliability.

We service and maintain all important brands of heating units and systems, including:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Competitive Prices You Can Trust
• Professional Quality Workmanship Assurance
• Great Reviews & Reputation
• We’re Personable & Friendly
• A Team of Experienced and Licenced Professionals
• Get a Free Quote and No Obligation

Our Promise To You

At Melbourne Heating Repairs & Service we understand the inconvenience of not having any hot water. This is something we don’t think anyone should need to go through. That’s why we give the highest priority on hot water emergencies. Our plumbers are friendly and trustworthy and without doubt, we will be able to assist with any emergency.

We pride ourselves on our service to customers and it is our belief that the little things matter the most.

We take pride in our exceptional customer service. and here’s the reason our customers appreciate us:

• We always arrive when we tell you we will.
• Our technicians will give you a call when they are 30 minutes away.
• Upfront competitive pricing and advice before we start the job.
• Always getting our hands clean after ourselves.

At Melbourne Heating Repairs & Service offer emergency and maintenance services in plumbing, electrical, and heating. If you are unsure about our services or what we can offer, please contact us.